ZyXEL Communications LTE5121, Руководство пользователя

Страница: 47 / 234

Chapter 5 Wireless
LTE-5121 User’s Guide
47
5.2.1 No Security
Select No Security to allow wireless stations to communicate with the access points without any
data encryption or authentication.
Note: If you do not enable any wireless security on your LTE Device, your network is
accessible to any wireless networking device that is within range.
Figure 23
Wireless > General: No Security
The following table describes the labels in this screen.
5.2.2 Basic (Static WEP/Shared WEP Encryption)
WEP encryption scrambles the data transmitted between the wireless stations and the access points
(AP) to keep network communications private. Both the wireless stations and the access points
must use the same WEP key.
There are two types of WEP authentication namely, Open System (Static WEP) and Shared Key
(Shared WEP).
Open system is implemented for ease-of-use and when security is not an issue. The wireless station
and the AP or peer computer do not share a secret key. Thus the wireless stations can associate
with any AP or peer computer and listen to any transmitted data that is not encrypted.
Security Mode Select Basic or More Secure to add security on this wireless network. The wireless
clients which want to associate to this network must have same wireless security
settings as the LTE Device. When you select to use a security, additional options
appears in this screen.
Or you can select No Security to allow any client to associate with this network
without any data encryption or authentication.
See the following sections for more details about wireless security modes.
Apply Click Apply to save your changes back to the LTE Device.
Cancel Click Cancel to restore your previously saved settings.
Table 7
Network > Wireless LAN > General (continued)
LABEL DESCRIPTION
Table 8
Wireless > General: No Security
LABEL DESCRIPTION
Security Level Choose No Security from the sliding bar.