ZyXEL Communications LTE5121 Скачать руководство пользователя страница 39

Страница: 39 / 234

Chapter 4 Broadband

LTE-5121 User’s Guide

4.3 The SIM Screen

Use the SIM screen to enter the PIN of your SIM card.

Entering the wrong PIN code 3 times locks the SIM card after which you
need a PUK from the service provider to unlock it.

Click Network Setting > Broadband > SIM. The following screen opens.

Figure 19

SIM

The following table describes the fields in this screen.

Apply

Click Apply to save your changes.

Back

Click Back to return to the previous screen.

Table 4

Broadband Edit (continued)

LABEL

DESCRIPTION

Table 5

SIM

LABEL

DESCRIPTION

SIM card
status

This displays the SIM card status:

PIN disabled - the SIM card has no PIN code security.

PIN required - the SIM card has PIN code security, but you did not enter the PIN code yet.

PIN verified - the SIM card has PIN code security, and you entered the correct PIN code.

PIN locked - you entered an incorrect PIN code too many times, so the SIM card has been
locked; call the ISP for a PUK (Pin Unlock Key) to unlock the SIM card.

SIM card locked call operator - the PUK (Pin Unlock Key) failed, so the SIM card has been
locked.

No SIM Card - the LTE Device does not detect that there is a SIM card inserted.

SIM Card Error - there is another SIM card error different from the ones listed above.

PIN
verification

A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN code, you
cannot use the 3G card.

Select Enable if the 3G service provider requires you to enter a PIN to use the SIM card.

Select Disable if the 3G service provider lets you use the SIM without inputting a PIN.

Содержание LTE5121











































































































































































































































Результаты поиска

Содержание LTE5121

Отзывы:

Похожие инструкции для LTE5121

Бренды по названию

Популярные бренды

ZyXEL Communications LTE5121, Руководство пользователя

Результаты поиска

Содержание LTE5121

Отзывы:

Похожие инструкции для LTE5121

Бренды по названию

Популярные бренды