ZyXEL Communications LTE2566-M634, Руководство пользователя, Страница: 67 / 151

Chapter 8 WLAN
LTE2566-M634 User’s Guide
67
8.5 The MAC Filter Screen
This screen allows you to configure the LTE2566-M634 to exclude specific devices from accessing the
LTE2566-M634 (
Deny listed stations ). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this
screen.
Use this screen to view your LTE2566-M634’s MAC filter settings and add new MAC filter rules. Click
Configuration > Network > Wireless LAN > MAC Filter . The screen appears as shown.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between a
wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with each
other.
Management
Allowance Select Disable so guest users cannot log into the Web Configurator (http:// 192.168.1.1) to
change the LTE2566-M634 settings. Otherwise, select Enable .
Security Mode Select WPA2-PSK or WPA-PSK / WPA2-PSK to add security on this wireless network. The wireless
clients which want to associate to this network must have same wireless security settings as this
device. After you select to use a security, additional options appears in this screen. See
Section
8.3 on page 63 for detailed information on different security modes. Or you can select Open to
allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only Open and WPA2-PSK are
available in this field.
Encryption Select the encryption type of data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP / AES to allow the wireless clients to use either TKIP or AES .
Preshared Key Type a password the wireless stations need to enter to connect to the wireless network.
Group Key
Update Timer The WPA Group Key Update Timer is the rate at which the AP (if using WPA-PSK key
management) or RADIUS server (if using WPA key management) sends a new group key out to
all clients. The re-keying process is the WPA equivalent of automatically changing the WEP key
for an AP and all stations in a WLAN on a periodic basis. Setting of the WPA Group Key Update
Timer is also supported in WPA-PSK mode. The default setting is 3600 seconds (60 minutes).
Apply Click Apply to save your changes back to the LTE2566-M634.
Table 22 Configuration > Network > Wireless LAN > Guest AP (continued)
LABEL DESCRIPTION