Chapter 7 WAN
LTE2566-M634 User’s Guide
53
The following table describes the labels in this screen.
Table 14 Configuration > Network > WAN > WAN Management
LABEL
DESCRIPTION
Cellular WAN
Network Type
Select the type of the network (
4G
or
3G
) to which you want the LTE2566-M634 to
connect. Otherwise, select
Auto
to have the LTE2566-M634 connect to an available
network using the default settings on the SIM card. If the currently registered mobile
network is not available or the mobile network’s signal strength is too low, the
LTE2566-M634 switches to another available mobile network.
Band Selection
Select
Manual
to select the frequency bands the LTE2566-M634 uses to connect to
the mobile network. Otherwise, select
Auto
to have the LTE2566-M634 connect to
any available frequency band using the default settings.
Roaming
3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your LTE2566-M634 is kept
connected to the Internet when you are traveling outside the geographical
coverage area of the network to which you are registered.
Dial-Up Profile
Select
Auto-Detection
to have the LTE2566-M634 use the inserted SIM card’s default
settings to connect to any available mobile network.
Select
Manual-configuration
and enter the information provided by your service
provider to connect to the service provider’s mobile network.
APN
APN
Connections with different APNs (Access Point Names) may provide different
services (such as Internet access or MMS (Multi-Media Messaging Service)) and
charge method.
The corresponding APN automatically displays when you select a pre-defined
service provider.
If you select
Manual
in the
Dial-Up Profile
field, manually enter the APN provided by
your service provider. You can enter up to 32 ASCII printable characters. Spaces are
allowed.
Account
Type the user name (of up to 64 ASCII printable characters) given to you by your
service provider.
Password
Type the password (of up to 64 ASCII printable characters) associated with the user
name above.
Authentication
The LTE2566-M634 supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms
Select an authentication protocol (
PAP
, or
CHAP
) used by the service provider.
Otherwise, select
Auto
to have the LTE2566-M634 accept either CHAP or PAP.
IP Type
Select
IPv4
if you want the LTE2566-M634 to run IPv4 only.
Select
IPv6
if you want the LTE2566-M634 to run IPv6 only.
Select
IPv4v6
to allow the LTE2566-M634 to run IPv4 and IPv6 at the same time.
MTU
Enter the MTU (Maximum Transmission Unit) of each data packet, in bytes, that can
move through the WAN connection.
Содержание LTE2566-M634
Страница 23: ...23 PART I User s Guide...
Страница 39: ...Chapter 4 Tutorials LTE2566 M634 User s Guide 39...
Страница 40: ...40 PART II Technical Reference...