Prestige 202H Plus Quick Start Guide
4
2 Hardware Installation
2.1 Rear Panel
LABEL
DESCRIPTION
ON/OFF
Turn the router on and off by pushing the power button (in is ON, out is OFF).
POWER 12VAC
Connect to a power source using the power adapter for your region (see your
User’s Guide
).
LAN 1-4
Connect to computer(s) / external hub(s) using an Ethernet cable. The LAN ports are auto-
crossover, which means either a crossover or straight-through Ethernet cable will do in either
case.
CONSOLE
Connect the male end of the console cable to the console port of the router and the female end to
a serial port (COM1, COM2 or other COM port) of your computer.
ISDN
Connect the router to the ISDN network using the included ISDN cable. Plug one end of the cable
into the port labeled
ISDN
and the other to the ISDN wall jack.
PHONE 1-2
Connect your analog phone devices to these ports via R-J11 cables.
2.2 The Front Panel LEDs
Turn on the Prestige by pressing the
ON/OFF
button.
The
PWR/SYS
LED blinks green while performing a system test and then stays on steady green if the testing is
successful. If the router senses a low voltage power supply, the
PWR/SYS
LED turns on steady red. The
LAN
,
and
ISDN
LEDs turn on if they are properly connected.
