manualshive.com logo in svg

ZyXEL Communications IES-1248-71, Руководство пользователя

Продукт ZyXEL Communications IES-1248-71 предлагает потрясающие возможности для управления сетями. Пользователи могут легко настроить его с помощью инструкций в прилагаемом руководстве. Скачайте бесплатное Руководство пользователя с {сайта} и начните использовать все функции этого продукта уже сегодня.

Поделиться
Скачать
background image

 Chapter 28 DHCP Relay

IES-1248-71/73 User’s Guide

203

The following table describes the labels in this screen.

Table 55   

DHCP Relay

LABEL

DESCRIPTION

Enable DHCP 

Relay:

Enable DHCP relay to have the IES-1248 relay DHCP requests to a DHCP 

server and the server’s responses back to the clients. 

Relay Mode

Specify how the IES-1248 relays DHCP requests.

Auto

 - The IES-1248 routes DHCP requests to the active server for each VLAN.

Both

 - The IES-1248 routes DHCP requests to the primary and secondary 

server for each VLAN, regardless of which one is active.

Enable Option82 

Sub-option1

Enable DHCP relay info to have the IES-1248 add the originating port numbers 

to DHCP requests regardless of whether the DHCP relay is on or off.

Sub-option1 (Circuit 

ID)

Use this field to specify up to 23 ASCII characters of additional information for 

the IES-1248 to add to the DHCP requests that it relays to a DHCP server.
Examples of information you could add would be the chassis number of the IES-

1248 or the ISP’s name.

Enable Option82 

Sub-option2

Enable DHCP relay info to have the IES-1248 add the sub-option 2 (Remote ID) 

to DHCP requests regardless of whether the DHCP relay is on or off.

Sub-option2 

(Remote ID)

Use this field to specify up to 23 ASCII characters of additional information for 

the IES-1248 to add to the DHCP requests that it relays to a DHCP server.

Apply

Click 

Apply

 to save your changes to the IES-1248’s volatile memory. The IES-

1248 loses these changes if it is turned off or loses power, so use the 

Config 

Save

 link on the navigation panel to save your changes to the non-volatile 

memory when you are done configuring.

Cancel

Click 

Cancel

 to begin configuring this screen afresh.

VLAN ID

Enter the ID of the VLAN served by the specified DHCP relay(s). Enter 0 to set 

up the IP address(es) of the default DHCP relay(s).

Primary Server IP

Enter the IP address of one DHCP server to which the switch should relay 

DHCP requests for the selected VLAN.

Secondary Server 

IP

Enter the IP address of a second DHCP server to which the switch should relay 

DHCP requests for the selected VLAN. Enter 0.0.0.0 if there is only one DHCP 

relay for the selected VLAN.

Active Server

This field has no effect if the 

Relay Mode

 is 

Both

. If the 

Relay Mode

 is 

Auto

, 

select which DHCP server (the primary one or the secondary one) to which the 

IES-1248 should relay DHCP requests for the selected VLAN.

Apply

Click 

Apply

 to save your changes to the IES-1248’s volatile memory. The IES-

1248 loses these changes if it is turned off or loses power, so use the 

Config 

Save

 link on the navigation panel to save your changes to the non-volatile 

memory when you are done configuring.

Cancel

Click 

Cancel

 to begin configuring this screen afresh.

Server List

This section lists the DHCP servers that are already set up for each VLAN. An 

asterisk in parentheses (*) indicates which DHCP server is active for each 

VLAN.

Index

This is a sequential value, and it is not associated with any entry. The entries 

are sorted by VLAN ID.

VLAN ID

This field displays the ID of the VLAN served by the specified DHCP relay(s).

Primary Server IP

This field displays the IP address of one DHCP server to which the switch 

should relay DHCP requests.

Secondary Server 

IP

This field displays the IP address of a second DHCP server to which the switch 

should relay DHCP requests. This field is 0.0.0.0 if the primary server is the only 

DHCP relay.

Содержание IES-1248-71

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IES-1248-71

i3 International S244 Quick Start Manual preview
S244
Бренд: i3 International Страницы: 2
FANATEC PODIUM Quick Manual preview
PODIUM
Бренд: FANATEC Страницы: 40
Nectarine Health Satellite Manual preview
Satellite
Бренд: Nectarine Health Страницы: 9
Cabletron Systems 3T01-04 User Manual preview
3T01-04
Бренд: Cabletron Systems Страницы: 52
Broadcast Tools Sentinel 3 Installation And Operation Manual preview
Sentinel 3
Бренд: Broadcast Tools Страницы: 28
Teseq NSG 439 User Manual preview
NSG 439
Бренд: Teseq Страницы: 60
Ihse Draco major K474-U8/C8 User Manual preview
Draco major K474-U8/C8
Бренд: Ihse Страницы: 167
steute Ex 95 SB Mounting And Wiring Instructions preview
Ex 95 SB
Бренд: steute Страницы: 10
Eaton 9476-ET Instruction Manual preview
9476-ET
Бренд: Eaton Страницы: 43
ASTEK A51606-SW Quick Start Manual preview
A51606-SW
Бренд: ASTEK Страницы: 3
Larson Electronics EXHL-TRN-LE1 Series Manual preview
EXHL-TRN-LE1 Series
Бренд: Larson Electronics Страницы: 2
Transition Networks SISTG1040-242-LRT Install Manuals preview
SISTG1040-242-LRT
Бренд: Transition Networks Страницы: 31
Delta Electronics AGC764V1 Installation Manual preview
AGC764V1
Бренд: Delta Electronics Страницы: 31
FCI FS10A Installation & Operation Manual preview
FS10A
Бренд: FCI Страницы: 78
WTI IPS-400 User Manual preview
IPS-400
Бренд: WTI Страницы: 56
Eaton S-T0 Instruction Leaflet preview
S-T0
Бренд: Eaton Страницы: 3
IOGear CS1222TAA4 Manual preview
CS1222TAA4
Бренд: IOGear Страницы: 54
Pilz PSEN ma2.1p/ATEX Operating Instructions Manual preview
PSEN ma2.1p/ATEX
Бренд: Pilz Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды