ZyXEL Communications AMG1302-T11C, Руководство пользователя

Страница: 37 / 307

Chapter 4 Tutorials
AMG1302-T11C User’s Guide
37
Thomas can now use the WPS feature to establish a wireless connection between his notebook and
the AMG1302-T11C (see
Section 4.4.2 on page 37 ). He can also use the notebook’s wireless client
to search for the AMG1302-T11C (see Section 4.4.3 on page 41 ).
4.4.2 Using WPS
This section shows you how to set up a wireless network using WPS. WPS is a way to automatically
set up a secure wireless network connection between an AP and a notebook. Limitations of using
WPS are that is must be done two devices at a time and within two minutes. It uses the AMG1302-
T11C as the AP and ZyXEL NWD210N as the wireless client which connects to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCMCIA card).
There are two WPS methods to set up the wireless client settings:
• Push Button Configuration (PBC) - simply press a button. This is the easier of the two
methods.
• PIN Configuration - configure a Personal Identification Number (PIN) on the AMG1302-T11C. A
wireless client must also use the same PIN in order to download the wireless network settings
from the AMG1302-T11C.
Push Button Configuration (PBC)
1
Make sure that your AMG1302-T11C is turned on and your notebook is within the cover range of the
wireless signal.
2
Make sure that you have installed the wireless client driver and utility in your notebook.
3
Make sure wireless LAN is enabled and the wireless security mode is set to WPA-PSK2 or No
Security in the Network Setting > Wireless > General screen.
4
In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button
(
Start or WPS button).
5
Push and hold the WPS button on the AMG1302-T11C for 1-2 seconds. Alternatively, you may log
into AMG1302-T11C’s web configuration, enable WPS and click the WPS button in the Network
Setting > Wireless > WPS screen.