manualshive.com logo in svg

ZyXEL Communications AMG1302-T11C, Руководство пользователя, Страница: 283 / 307

Поделиться
Скачать
ZyXEL Communications AMG1302-T11C Скачать руководство пользователя страница 283

 Appendix F IPv6

AMG1302-T11C User’s Guide

283

such as the system name. The interface-ID option provides slot number, port information and the 
VLAN ID to the DHCPv6 server. The remote-ID option (if any) is stripped from the Relay-Reply 
messages before the relay agent sends the packets to the clients. The DHCP server copies the 
interface-ID option from the Relay-Forward message into the Relay-Reply message and sends it to 
the relay agent. The interface-ID should not change even after the relay agent restarts.

Prefix Delegation

Prefix delegation enables an IPv6 router to use the IPv6 prefix (network address) received from the 
ISP (or a connected uplink router) for its LAN. The AMG1302-T11C uses the received IPv6 prefix 
(for example, 2001:db2::/48) to generate its LAN IP address. Through sending Router 
Advertisements (RAs) regularly by multicast, the AMG1302-T11C passes the IPv6 prefix information 
to its LAN hosts. The hosts then can use the prefix to generate their IPv6 addresses.

ICMPv6

Internet Control Message Protocol for IPv6 (ICMPv6 or ICMP for IPv6) is defined in RFC 4443.  
ICMPv6 has a preceding Next Header value of 58, which is different from the value used to identify 
ICMP for IPv4. ICMPv6 is an integral part of IPv6. IPv6 nodes use ICMPv6 to report errors 
encountered in packet processing and perform other diagnostic functions, such as "ping".

Neighbor Discovery Protocol (NDP)

The Neighbor Discovery Protocol (NDP) is a protocol used to discover other IPv6 devices and track 
neighbor’s reachability in a network. An IPv6 device uses the following ICMPv6 messages types: 

• Neighbor solicitation: A request from a host to determine a neighbor’s link-layer address (MAC 

address) and detect if the neighbor is still reachable. A neighbor being “reachable” means it 
responds to a neighbor solicitation message (from the host) with a neighbor advertisement 
message. 

• Neighbor advertisement: A response from a node to announce its link-layer address.
• Router solicitation: A request from a host to locate a router that can act as the default router and 

forward packets.

• Router advertisement: A response to a router solicitation or a periodical multicast advertisement 

from a router to advertise its presence and other parameters.

IPv6 Cache

An IPv6 host is required to have a neighbor cache, destination cache, prefix list and default router 
list. The AMG1302-T11C maintains and updates its IPv6 caches constantly using the information 
from response messages. In IPv6, the AMG1302-T11C configures a link-local address automatically, 
and then sends a neighbor solicitation message to check if the address is unique. If there is an 
address to be resolved or verified, the AMG1302-T11C also sends out a neighbor solicitation 
message. When the AMG1302-T11C receives a neighbor advertisement in response, it stores the 
neighbor’s link-layer address in the neighbor cache. When the AMG1302-T11C uses a router 
solicitation message to query for a router and receives a router advertisement message, it adds the 
router’s information to the neighbor cache, prefix list and destination cache. The AMG1302-T11C 
creates an entry in the default router list cache if the router can be used as a default router.

When the AMG1302-T11C needs to send a packet, it first consults the destination cache to 
determine the next hop. If there is no matching entry in the destination cache, the AMG1302-T11C 

Содержание AMG1302-T11C




















































































































































































































































































































Отзывы:

Нет отзывов