ZyXEL Communications AMG1302-T11C Скачать руководство пользователя страница 177 | Manualshive

Страница: 177 / 307

ZyXEL Communications AMG1302-T11C Скачать руководство пользователя страница 177

Chapter 15 Firewall

AMG1302-T11C User’s Guide

177

network traffic against the firewall rules (in the order you list them). When the traffic matches a
rule, the AMG1302-T11C takes the action specified in the rule.

Firewall rules are grouped based on the direction of travel of packets to which they apply:

Note: The LAN includes both the LAN port and the WLAN.

By default, the AMG1302-T11C’s stateful packet inspection allows packets traveling in the following
directions:

• LAN to Router

These rules specify which computers on the LAN can manage the AMG1302-T11C (remote
management).

Note: You can also configure the remote management settings to allow only a specific

computer to manage the AMG1302-T11C.

• LAN to WAN

These rules specify which computers on the LAN can access which computers or services on the
WAN.

By default, the AMG1302-T11C’s stateful packet inspection drops packets traveling in the following
directions:

• WAN to LAN

These rules specify which computers on the WAN can access which computers or services on the
LAN.

Note: You also need to configure NAT port forwarding (or full featured NAT address

mapping rules) to allow computers on the WAN to access devices on the LAN.

• WAN to Router

By default the AMG1302-T11C stops computers on the WAN from managing the AMG1302-T11C.
You could configure one of these rules to allow a WAN computer to manage the AMG1302-T11C.

Note: You also need to configure the remote management settings to allow a WAN

computer to manage the AMG1302-T11C.

You may define additional rules and sets or modify existing ones but please exercise extreme
caution in doing so.

For example, you may create rules to:

• Block certain types of traffic, such as IRC (Internet Relay Chat), from the LAN to the Internet.
• Allow certain types of traffic, such as Lotus Notes database synchronization, from specific hosts

on the Internet to specific hosts on the LAN.

• Allow everyone except your competitors to access a web server.
• Restrict use of certain protocols, such as Telnet, to authorized users on the LAN.

• LAN to Router

• WAN to LAN

• LAN to WAN

• WAN to Router

«
...
175
176
177
178
179
...
»

Содержание AMG1302-T11C




















































































































































































































































































































Отзывы:

Нет отзывов