ZyXEL Communications AMG1202-T series, Руководство пользователя, Страница: 95 / 320

Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
95
In order to configure and enable WEP encryption, click Network Setting > Wireless to display the
General screen, then select Basic as the security level.
Figure 28
Wireless > General: Basic (WEP)
The following table describes the wireless LAN security labels in this screen.
7.2.3 More Secure (WPA(2)-PSK)
The WPA-PSK security mode provides both improved data encryption and user authentication over
WEP. Using a Pre-Shared Key (PSK), both the AMG1302/AMG1202-TSeries and the connecting
client share a common password in order to validate the connection. This type of encryption, while
robust, is not as strong as WPA, WPA2 or even WPA2-PSK. The WPA2-PSK security mode is a
newer, more robust version of the WPA encryption standard. It offers slightly better security,
although the use of PSK makes it less robust than it could be.
Table 17
Wireless > General: Basic (WEP)
LABEL DESCRIPTION
Security Level Select Basic to enable WEP data encryption.
Generate
password
automatically Select this option to have the AMG1302/AMG1202-TSeries automatically generate a
password. The password field will not be configurable when you select this option.
Password The password (WEP key) are used to encrypt data. Both the AMG1302/AMG1202-TSeries
and the wireless stations must use the same password (WEP key) for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
WEP Encryption Select 64-bits or 128-bits .
This dictates the length of the security key that the network is going to use.