ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 225

Страница: 225 / 320

Chapter 25 Remote Management

AMG1302/AMG1202-TSeries User’s Guide

225

Figure 117

Maintenance > RemoteMGMT > WWW

The following table describes the labels in this screen.

Table 85

Maintenance > RemoteMGMT > WWW

LABEL

DESCRIPTION

Server Port

This displays the service port number for accessing the AMG1302/AMG1202-TSeries
using HTTP or HTTPS. If the number is grayed out, it is not editable.

Server Access

Select the interface(s) through which a computer may access the AMG1302/AMG1202-
TSeries using this service.

Note: It is recommended if you are allowing WAN access even temporarily to change the

default password (in

Maintenance

User Account

). To allow access from the

WAN, you will need to configure a WAN to Router firewall rule. See

Section 4.1 on

page 37

for information on configuring firewall rules.

Secured Client IP
Address

A secured client is a “trusted” computer that is allowed to communicate with the
AMG1302/AMG1202-TSeries using this service.

Select

All

to allow any computer to access the AMG1302/AMG1202-TSeries using this

service.

Choose

Range

to just allow the computer(s) with an IP address in the range that you

specify to access the AMG1302/AMG1202-TSeries using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Содержание AMG1202-T series

































































































































































































































































































































Результаты поиска

Содержание AMG1202-T series

Отзывы:

ZyXEL Communications AMG1202-T series, Руководство пользователя, Страница: 225 / 320

Результаты поиска

Содержание AMG1202-T series

Отзывы: