ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 320

ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 18

Chapter 1 Introduction

AMG1302/AMG1202-TSeries User’s Guide

18

1.6 Using the WPS Button

You can also use the

WPS

button to quickly set up a secure wireless connection between the

AMG1302/AMG1202-TSeries and a WPS-compatible client by adding one device at a time.

To activate WPS:

1

Make sure the

POWER

LED is on and not blinking.

2

Press the

WPS

button for 1-5 seconds and release it. See below for WPS button location.

3

Press the WPS button on another WPS-enabled device within range of the AMG1302/AMG1202-
TSeries. The

WPS

LED should flash while the AMG1302/AMG1202-TSeries sets up a WPS

connection with the other wireless device.

4

Once the connection is successfully made, the

WPS

LED shines green.

(WPS/WLAN)

Green

On

The wireless network is activated.

Blinking

The AMG1302/AMG1202-TSeries is communicating with other
wireless clients.

Green

Blinking

The AMG1302/AMG1202-TSeries is setting up a WPS connection.

Off

The wireless network is not activated.

(DSL)

Green

On

The DSL line is up.

Blinking

The AMG1302/AMG1202-TSeries is initializing the DSL line.

Off

The DSL line is down.

(INTERNET)

Green

On

The AMG1302/AMG1202-TSeries has an IP connection but no
traffic.

Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.

Blinking

The AMG1302/AMG1202-TSeries is sending or receiving IP traffic.

Red

On

The AMG1302/AMG1202-TSeries attempted to make an IP
connection but failed. Possible causes are no response from a
DHCP server, no PPPoE response, PPPoE authentication failed.

Off

The AMG1302/AMG1202-TSeries does not have an IP connection.

Table 1

LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

WPS

«
...
16
17
18
19
20
...
»

Содержание AMG1202-T series

































































































































































































































































































































Отзывы:

Нет отзывов