ZyXEL Communications AAM1212, Руководство пользователя

Страница: 221 / 288

AAM1212 User’s Guide
220 Chapter 28 Switch Commands
28.2 IGMP Filter Commands
Use the IGMP filter commands to define IGMP filter profiles and assign them to ADSL ports.
IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a
service available to a specific IGMP multicast group. You can configure an IGMP filter profile
for an IGMP multicast group that has access to a service (like a SIP server for example). Then
you can assign the IGMP filter profile to ADSL ports that are allowed to use the service.
28.2.1 IGMP Filter Show Command
Syntax:
switch igmpfilter show [portlist]
where
This command displays which IGMP filter profile an ADSL port(s) is using.
The following example displays which IGMP filter profile ADSL port 9 is using.
Figure 125 IGMP Filter Show Command Example
28.2.2 IGMP Filter Set Command
Syntax:
switch igmpfilter set [<port>|*] <name>
daisychain
Sets the device to daisychain mode.
standalone
Sets the device to standalone mode.
showall [nopause]
Displays all of the AAM’s switch
configuration.
Table 61 Switch Commands (continued)
COMMAND DESCRIPTION
[portlist]
= You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> switch igmpfilter show 9
port profile
--------------------------------------
9 DEFVAL