ZyXEL Communications AAM1212, Руководство пользователя

Страница: 214 / 288

AAM1212 User’s Guide
Chapter 27 ADSL Commands 213
where
The
pvc show
command allows you to display the PVC parameters of the specified ADSL
port(s) or all of the ADSL ports if you do not specify any.
27.5.2 PVC Set Command
Syntax:
adsl pvc set <portlist> <vpi> <vci> <super |vid = 1..4094 <priority>>
<vcprofile>
where
[portlist]
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
[<vpi> <vci>]
= The VPI and VCI of an individual PVC.
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<vpi>
= The VPI setting can be 0 to 255.
<vci>
= The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
if the vpi is not 0.
<super |vid =
1..4094
<priority>
= Use
super
to set this channel as a super channel. The super
channel can forward frames belonging to multiple VLAN
groups (that are not assigned to other channels). A channel that
is not the super channel can only forward frames with a single
VLAN ID (that is configured on that channel). The AAM would
drop any frames received from the subscriber that are tagged
with another VLAN ID.
Use the default VID (1 to 4094) to set this channel as a normal
channel. Each PVC must have a unique VID since the AAM
forwards traffic back to the subscribers based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the AAM forwards traffic back to the
subscribers based on the VLAN ID).
The priority value (0 to 7) is to add to incoming frames without
a (IEEE 802.1p) priority tag.
<vcprofile>
= Assign a virtual channel profile to the PVC.