ZyXEL Communications AAM1212, Руководство пользователя

Страница: 135 / 288

AAM1212 User’s Guide
134 Chapter 15 Port Authentication
Figure 66 Port Authentication: RADIUS
The following table describes the labels in this screen.
Table 37 Port Authentication: RADIUS
LABEL DESCRIPTION
802.1x Click 802.1x to configure individual port authentication settings.
Enable
Authentication
Server
Select this check box to have the AAM use an external RADIUS server to
authenticate users.
IP address Enter the IP address of the external RADIUS server in dotted decimal notation.
UDP Port The default port of the RADIUS server for authentication is 1812 . You need not
change this value unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 31 alphanumeric characters) as the key to be shared
between the external RADIUS server and the AAM. This key is not sent over the
network. This key must be the same on the external RADIUS server and the AAM.
Apply Click Apply to save your changes to the AAM’s volatile memory. The AAM loses
these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Enable Local
Profile Setting
Select this check box to have the AAM use its internal database of user names and
passwords to authenticate users.
Name Type the user name of the user profile. You can enter up to 31 ASCII characters;
spaces are not allowed.
Password Type a password for this user profile. You can enter up to 31 ASCII characters;
spaces are not allowed.
Retype Password
to confirm
Type the password again to make sure you have entered it properly.
Add Click Add to save your changes to the AAM’s volatile memory. The AAM loses
these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are
done configuring.