Page 7
Focus Adjustment
The focus knob contains a passive braking system that allows the bellows to stay
in place when the light is in a downward position. For this system to work properly,
there will be a small amount of rotational movement that engages and disengages
the brake at the focus knob without moving the bellows. This is normal operation. The
center screw that holds the focus knob in place should not be overtightened or the
braking system will not work properly.
Turn the focus knob on the back of the unit to change the output between spot and
flood. At flood position the lens housing will automatically extend approximately 1”
[25mm]. Compress the lens housing below this level by hand for packing & transport
only. CAUTION: Do not move the lens housing by hand between the flood & spot
positions. Do not force the focus knob past its end stops.
On/Off & Dimming
To turn on the F8 press and release the Dimmer knob. Press and release again
to turn the light off. Turn the Dimmer knob to the right to increase brightness
and to the left to decrease brightness.
LED Display: The LED display will shut off after 5 seconds of inactivity. To
make the display reappear press either button.
Focus Adjustment
The focus knob contains a passive braking system that allows the bellows to
stay in place when the light is in a downward position. For this system to
work properly, there will be a small amount of rotational movement that
engages and disengages the brake at the focus knob without moving the
bellows. This is normal operation. The center screw that holds the focus
knob in place should not be overtightened or the braking system will not
work properly.
Turn the focus knob on the back of the unit to change the output between
approximately 1” [25mm]. Compress the lens housing below this level by
hand for packing & transport only. CAUTION: Do not move the lens housing
past its end stops.
work properly, there will be a small amount of rotational movement that
engages and disengages the brake at the focus knob without movin g the
bellows. This is normal operation. The center screw that holds the focus
knob in place should not be overti ghtened or the braking system will not
work properly.
Turn the focus knob on the back o f the unit to change the output between
spot and ood. At ood position the lens housin g will automatically exten d
approximately 1” [25mm]. Compress the lens housing below this level by
hand for packin g & transport only. CAUTION: Do not move the lens housin
by hand between the ood & spot positions. Do not force the focus knob
past its end stops.
Pack
Flood
Spot
Page 10
