Page 5
F8 Fresnel
Operations
Power Supply:
Power is supplied through a standard 4-pin XLR connector using
either the included Worldwide 100-240V AC Adapter (P/N 13-17005) or a suitable
14.4V battery and mounting plate. Please observe correct polarity. Batteries that
indicate a full charge when idle may quickly drop in capacity when under load. For
optimal operation please fully charge batteries before use and be sure they are rated
to provide up to 100W of continuous power, with at least 8.3 amps.
s
n
o
i
t
a
r
e
p
O
l
e
n
s
e
r
F
8
F
Power Supply: The Zylight F8 Fresnel contains an automatic voltage
switch, which will auto sense the voltage when it is plugged into the
power source. With this switch there is no need to worry about the
correct power voltage; this unit can be plugged into any outlet rated for
100-240v AC. Also, be sure to only use the included power cable
supplied with the unit.
Power is supplied through a standard 4-pin XLR connector using either
the included Worldwide AC Adapter (P/N 13-17005) or a suitable 14.4V
battery. Please observe correct polarity. Batteries that indicate a full
charge when idle may quickly drop in capacity when under load. For
optimal operation please fully charge batteries before use and be sure
they are rated to provide up to 100W of continuous power, with at least
8.3 amps.
F8 Fresnel
Operations
Power Supply: The Zylight F8 Fresnel contains an automatic voltage
switch, which will auto sense the voltage when it is plugged into the
power source. With this switch there is no need to worry about the
correct power volt age; this unit can be pl ugged into any outlet rated for
100-240v AC. Also, be sure to only use the included power cable
supplied with the unit .
Power is supplied through a standard 4-pin XLR connector using either
the included Worldwide AC Ada pter (P/N 13-17005) or a suitable 14.4V
battery. Please observe correct polarit y. Batteries that indicate a full
charge when idle may quickly drop in capacity when under load. For
optimal operation please fully char ge batteries before use and be sure
they are rated to provide up to 100W o f continuous power, with at least
8.3 amps.
Focus Knob
Yoke/Handle
Mount
Dimmer
DMX Breakout Jack
Yoke/Handle
Mount
Power Input
MODE Knob to set
DMX Address & ZyLink Channel
Page 9
