ZP502 User Manual
39
Notice: Black List and Limit List can record at most10 items respectively.
4.3.4.3. Digital Map Configuration
This system supports 4 dial modes:
1). End with “#”: dial your desired number, and then press #.
2). Fixed Length: the phone will intersect the number according to your specified length.
3). Time Out: After you stop dialing and waiting time out, system will send the number collected.
4). User defined: you can customize digital map rules to make dialing more flexible. It is realized
by defining the prefix of phone number and number length of dialing.
In order to keep some users' secondary dialing manner when dialing the external line with PBX,
phone can be added a special rule to realize it. so user can dial a number as external line prefix and
get the secondary dial tone to keep dial the external number. After finishing dialing, phone will
send the prefix and external number totally to the server.
For example, there is a rule 9, xxxxxxxx in the digital map table. After dialing 9, phone will send
the secondary dial tone, user may keep going dialing. After finished, phone will call the number
which starts with 9; actually the number sent out is 9-digit with 9.
Digital Map Configuration
Field name
explanation
End with "#"
Set Enable/Disable the phone ended with “#” dial.
Fixed Length
Specify the Fixed Length of phone ending with.
Time out
Set the timeout of the last dial digit. The call will be sent after
timeout.
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas,
or a list of digits.
x Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
