ZP502 User Manual
15
4. Web configuration
4.1. Introduction of configuration
4.1.1. Ways to configure
ZP502 has three different ways to different users.
U
se phone keypad.
U
se web browser
（
recommendatory way
）
.
U
se telnet with CLI command.
4.1.2. Password Configuration
There are two levels to access to phone: root level and general level. User with root level can
browse and set all configuration parameters, while user with general level can set all configuration
parameters except SIP (1-2) or IAX2’s that some parameters can not be changed, such as server
address and port. User will has different access level with different username and password.
1.
Default user with general level
：
u
sername
：
guest
a)
p
assword
：
guest
2.
Default user with root level
：
a)
u
sername
：
admin
b)
p
assword
：
admin
The default password of phone screen menu is 123.
4.2. Setting via web browser
When this phone and PC are connected to network, enter the IP address of the wan port in this
phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).
If you do not know the IP address, you can look it up on the phone’s display by pressing
button.
The login page is as below picture
:
After you configure the ip phone, you need click save button in config under Maintenance
in the left catalog to save your configuration. Otherwise the phone will lose your modification
after power off and on.
