ZUWA Impeller Pumps
13
6.3 Operation with hand drill or cordless screwdriver
The pump needs to be fixed when it is used with a hand drill or any other electric drill
to avoid turning.
Fixation can be done in two ways:
A) with drill adapter
The adapter either comes with the pump or can be ordered separately from the
manufacturer. The adapter is suitable for any standard drills and screwdrivers. Article
No. adapter: 11012300
>
Fix adapter on pump (see below).
>
Insert pump shaft into chuck and tighten.
>
Insert depth stop into upper aperture and tighten fixing screw.
B) with mounting feet and regraded support
Mounting feet and support can be ordered directly from the manufacturer.
Article No. mounting feet: 110 127 10
Article No. regraded support: 110 123 10
The support needs to be suitable for the drill. The
grading has to be high enough to provide for a
precisely horizontal alignment of drill and pump
>
Fix mounting feet on top of the support.
>
Insert pump shaft into chuck. Pump and drill
must be precisely aligned. Tighten chuck.
Caution
Material damage due to pressure on the shaft
>
Do not affix the drill to the support, but allow it to lie loosely in such a
way that it has some play.
