Issue date
：
2020/3/16
－
23
－
9. EMC (electromagnetic compatibility)
When using the device, the EMC precautions specified below must be observed.
• Only use spare parts approved by zumax for this device.
• Do not use any portable or mobile RF communication equipment in the vicinity of
the device as this may impair the device's function.
• Do not use a mobile phone in the vicinity of the equipment because the radio
interference can cause the equipment to malfunction. The effects of radio interference
on medical equipment depend on a number of various factors and are therefore
entirely unforeseeable.
• Please note the EMC guidelines on the following pages.
Warning: The microscope should not be used adjacent to or stacked with
other equipment and that if adjacent or stacked use is necessary, the ME
EQUIPMENT or MESYSTEM should be observed to verify normal operation
in the configuration in which it will be use.
Warning: Use of ACCESSORIES, transducers and cables other than those
specified, with the exception of transducers and cables sold by the
MANUFACTURER of the microscope as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY
of the microscope.
Guidance and manufacturer’s declaration – electromagnetic emissions
The microscope is intended for use in the electromagnetic environment specified below.
The customer or the user of the microscope should assure that it is used in such an
environment.
Emissions test
Compliance
Electromagnetic environment
– guidance
RF emissions
CISPR 11
Group 1
The microscope uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The microscope is suitable for use in all
establishments,
including
domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
IEV 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
