Issue date
：
2020/3/16
－
5
－
switch installed in the second arm serves to switch off the bulb when the
microscope is in "parking" position.
[11] Binocular tube
[12] LED power cable and the joint for power cable.
[13] Column
[14] Filter selection button.
Rotate this button to select the filters. There are positions: No filter/ Green
filter/ Yellow filter
[15] Manipulating handle.
For rough focusing, move the microscope up and down or right and left.
Available in Type ‘8’. (BFR: I don`t understand, this needs a bit of
explanation or leave the text away)
[16] Fixation nut.
Hang the microscope on the 120º
coupling using this nut.
[17] Star handler fixation screw.
Use this handle to adjust the damping of the microscope’s hanging axis.
[18] Star handler fixation screw.
Use this handle to adjust the damping of the microscope’s pitch.
[19] Locking pin.
Keep the microscope from falling when assembling and disassembling
accessories.
[20] Fixation screw of main microscope.
Used to fix the main eyepiece tube.
[21] Manipulating handle position.
Available in Type ‘T’.
[22] Fine focusing adjustment knob.
Rotate this knob to adjust the focus of the objective, focusing distance:
11mm.
[23] 110V/220V Voltage selector.
Pushing the selector upwards, input voltage is 110V, pushing the selector
downwards, input voltage is 220V.
[24] The joint for monitor (Optional)
It can output video of built-in camera.
[25] video interface (Optional)
