ZUG Miwell MWHSL60, Руководство по эксплуатации

Страница: 28 / 56

6 Operating the appliance
6.5 Timer
The timer functions like an egg timer. It can be used at any time and inde-
pendently of all other functions when the appliance is switched on.
Setting and starting the timer
▸ Press the sensor button.
▸ Turn the adjusting knob and set the required duration.
The timer can be set for:
▪ Up to 10 minutes in 10-second intervals, e.g. 9 minutes and 50 seconds.
▪ Over 10 minutes in 1-minute intervals, e.g. 1 hour and 12 minutes.
The maximum timer duration that can be set is 9 hours and 59 minutes.
▸ Press the adjusting knob to confirm.
– The timer starts.
– The countdown to the time remaining is visible in the digital display.
– The sensor button is illuminated in white.
When the timer finishes
When the set duration is up:
– An acoustic signal is emitted for 1 minute.
– The display says «Timer finished».
▸ Confirm the message and switch off the acoustic signal by pressing the ad-
justing knob or a sensor button.
Checking and changing
▸ Press the sensor button.
– The time remaining flashes in the digital display.
▸ Turn the adjusting knob to change the duration of the timer.
▸ Press the adjusting knob to confirm.
Switching off before time
▸ Press the sensor button.
– The time remaining flashes in the digital display.
▸ Press the sensor button again or turn the adjusting knob to set the count-
down to the time remaining to 0.
▸ Press the adjusting knob to confirm.
28