6 Operating the appliance
▸ Press the
sensor button.
–
The selection of operating modes appears in the display.
▸ Select the desired operating mode.
–
The microwave power level setting (in watts) appears in the display.
▸ Set the desired microwave power level by turning the adjusting knob and
pressing to confirm.
–
The duration
appears in the display.
▸ Set the desired duration and confirm.
–
If the duration is 20 minutes or less, the setting for the end time ap-
pears in the display. This allows a delayed start to be set.
If a delayed start has been set, the appliance starts later on.
▸ If you wish, set the desired end time and con-
firm.
–
The settings summary is displayed, e.g.:
3UHVVVWDUW 궇
곗 :
굙K 굚
▸ To start the selected operating mode, press
the sensor button.
–
The operating mode starts.
–
If a delayed start has been set, the appli-
ance remains switched off until the auto-
matic start.
With a delayed start, the settings summary remains visible for
3 minutes, then the display goes out. The
and sensor buttons
are illuminated in white; the sensor button is illuminated in orange.
6.2
Changing the microwave power level
The microwave power level cannot be changed during an automatic
programme.
To change the microwave power level during operation:
▸ Press the
sensor button.
–
The current microwave power level is displayed.
▸ Use the adjusting knob to set the required value and confirm.
–
The operating mode summary appears in the display.
26
Содержание Miwell MWHSL60
Страница 1: ...Operating instructions Miwell HSL Microwave...
Страница 54: ...54 Notes...