Zubler VARIO BALANCE, Руководство по эксплуатации

Страница: 8 / 16

8
• Move the cursor with the yellow key
(up/down) to Select material.
Confirm by pressing the green key.
• Move the cursor with yellow key
(up/down) to Tare scale.
• To reset the display to zero,
Confirm by pressing the green key.
2.2
Normal weighing
Tara scale
Run batch program
Edit materials
Set up menu
0.0
g
Tara scale
Run batch prog
ram
Edit materials
Set up menu
0.0 g
• Move the cursor with the yellow key
(up/down) to Add/Change material.
Confirm by pressing the green key.
Add/Change
Copy/Change
Move a material
Erase a material
0.0
g
• Move the cursor with the yellow key
(up/down) to the desired program
location.
• Use the yellow key (up/down)key to
jump five program locations forward
or back at a time.
• Once you have reached the desired
program location,
Confirm by pressing the green key.
Material to change:
0 - Zubler HS
100/25
1 -
2 - Zubler Press Max 100/26
3 - Gips Artikulation 100/20
4 - Gips
100/25
2.3
Programming
2.3.1 Add/Change material
Page
Zubler Gerätebau GmbH
■
D-89 081 Ulm
■
Tel. +49(0)731-14 52-0