14
3.
•
Move the cursor (yellow key up/down)
to Set up menu.
Confirm by pressing the green key.
Scales does not work at all
•
Check power supply (AC adapter)
•
Reset the scales by unplugging the AC adapter and plugging it back in
Weighing results are obviously incorrect
•
Has the scales been placed on a stable and level surface?
•
Is the scales located near a device that may cause electromagnetic
interference?
•
Remove all materials from the scales and reset it to zero by selecting
Tare scale.
•
Has the scales been overloaded?
2.4
Set up menu
Tara scale
Run batch progra
m
Edit materials
Set up menu
0.0
g
•
To adjust the display,
Confirm by pressing the green key.
Adjust contrast
34
Version information
Calibrate scale
•
Use the yellow key (up/down) to
select a contrast setting between 25
and 55.
Confirm by pressing the green key.
Adjust contrast
34
Malfunction
Page
Zubler Gerätebau GmbH
■
D-89 081 Ulm
■
Tel. +49(0)731-14 52-0
