5
1.
3
5
4
1
2
Page
Installation
1.1
Connecting the VARIO BALANCE
1 Scales
2 Display
3 AC adapter connector
4 Module connector
5 Power switch
Figure 2: VARIO BALANCE, front view
■
Carefully open the packing case.
■
Unpack the scales and its AC adapter.
In case of visible damage please contact
your supplier immediately.
■
Place the scales on a stable and level
surface.
■
Connect the AC adapter to the AC
connector. on the back of the scales
(left side when facing the control
panel).
■
After turn on the scales will perform a
self-test, following which it will be
ready to use.
Zubler Gerätebau GmbH
■
D-89 081 Ulm
■
Tel. +49(0)731-14 52-0