Zubler VARIO 230 Series, Руководство пользователя

Страница: 7 / 36

7
Made in Germany
Fenster Durchsicht Display
0
9 8 7
6 5 4
3 2 1
500°C V230ZR
1.4 Diagnostic program
When you switch on the device, the oven
starts a diagnostic program to check the
function of various sensors. At the same
time, the firing chamber is heated to
operating temperature. If there is a fault/
defect in basic functions, the oven will
display a corresponding error message.
The total duration of this process is about
20 minutes, with the option of bypassing
this step using the red
Abort
function
field. This gives you direct access to the
main menu.
Oven type / folder Main menu Furnace actual temperature Number pad
Select program
Edit program
Warm-up oven
Standby
Settings
Main menu
1.3 Display
The display of the VARIO furnaces is a
full-touch display including an additional
number block
The number block is only active when
numerical values can be entered.
The "
UP
" and "
DOWN
" arrows are active
when they can be used. In the top posi-
tion only the
down
arrow is active, in the
lower plate position only the up arrow is
active. In this way, the proper functioning
of the lift and the end positions can be
checked.