Zubler VARIO 230 Series, Руководство пользователя

Страница: 6 / 36

6
6
5
3
2
1 4
1. Installation
1 Main switch
2 USB port
3 Power cord connection
4 Main fuse
5 Power cord connection "vacuum pump"
6 Connection for the vacuum hose
1.1 Setting up the device
Q
Place the oven on a stable and level
work station
Q Set up the vacuum pump near the
oven (remove the rubber cover from
the brass nozzle))
Q Keep the original box and packaging
material for warranty claims and
service
Q Have the firing or pressing insulation
base ready for the further procedure.
Q
Power connection:
Q The ceramic oven requires
230V/50Hz or 115V/60Hz.
Q
Do not use extension cords
Q Connect oven to a dedicated
electrical outlet.
Q The main switch should be in the "0"
position.
Q
Connect the oven to the power
supply using the supplied power
cord.
Switch on the furnace at the main
switch.
1.2 Initial installation
Q After switching on for the first time,
instructions for the first steps are
shown on the display. After that, the
initial installation cycle runs auto-
matically. The oven is only ready for
operation after a complete set-up
(2.5.10).
Remove any remaining packaging
Initial installation steps
Q Setting the language
Q Put on the firing or press insulation
base
Q Brightness
Q
Volume
Q Connection vacuum pump
Q
Set date and time
Q Setting the unit (°C / °F)
Q Idle temperature
Standby temperature
Q Loading programs via USB
Q
Vacuum test
Q Drying program, (process time 20
min)