Zte ZXR10 8900 Series, Руководство пользователя

Страница: 120 / 186

ZXR10 8900 Series User Manual (Basic Configuration Volume)
Command Function
ZXR10(config-qpolicy-class)#
shaping-profile
< profile-name >
This applies shaping policy to a
traffic class
By default, a traffic class is associated with a default shaping
policy of corresponding level. Traffic class of level 1 can not be
associated with a shaping policy.
To cancel shaping policy of a traffic class, use no shaping-pr
ofile command.
8. To apply sub-policy to a traffic class, use the following com-
mand.
Command Function
ZXR10(config-qpolicy-class)#
policy < policy-name > This applies sub-policy to a
traffic class. The level of
sub-policy should be lower
9. To apply policy to an interface, use the following command.
Command Function
ZXR10(config-if)#
qos-policy < policy-name >{ in | out }
shaping < shaping-name >
This applies policy to an
interface. The interface can be
a physical port, a Layer 2 VLAN
port or a Smartgroup interface.
10. To copy QoS policy, use the following command.
Command Function
ZXR10(config)#
copy qos-profile source < profile-name >
destination < profile-name >[ overwrite ]
This copies QoS policy
If the source policy does not exist, system prompts error. If
policy name in destination has existed, and users do not set
the covering mode, system prompts error.
11. To display policy, use the following command.
Command Function
ZXR10(config)#
show qos-policy [< policy-name >[ detail ]] This displays policy
When the policy name is not configured, information of all poli-
cies is displayed. If a policy name is configured, information of
its sub-policy is also displayed.
12. To display policy statistic information on an interface, use the
following command.
108 Confidential and Proprietary Information of ZTE CORPORATION