Zte ZXR10 8900 Series, Руководство пользователя

Страница: 119 / 186

Chapter 10 QoS Configuration
Command Function
ZXR10(config-qpolicy)#
description < string > This configures policy
description. The description is
within 200 characters
To delete policy description, use no description command.
3. To enter traffic class, use the following command.
Command Function
ZXR10(config-qpolicy)#
flow-class < class-name > This enters traffic class
Each policy has a default traffic class named class default.
WRED, WFQ and shaping of the default traffic class can be con-
figured.
4. To configure queue priority, use the following command.
Command Function
ZXR10(config-qpolicy-class)#
priority { high | low } This configures queue priority
5. To apply WFQ policy to a traffic class, use the following com-
mand.
Command Function
ZXR10(config-qpolicy-class)#
wfq-profile < profile-name > This applies WFQ policy to a
traffic class
By default, a traffic class is associated with a default WFQ pol-
icy of corresponding level. If the WFQ policy does not exist,
system prompts error.
To cancel WFQ policy of a traffic class, use no wfq-profile
command.
6. To apply WRED policy to a traffic class, use the following com-
mand.
Command Function
ZXR10(config-qpolicy-class)#
wred-profile < profile-name >
This applies WRED policy to a
traffic class
By default, a traffic class is associated with a default WRED
policy of corresponding level.
To cancel WRED policy of a traffic class, use no wred-profile
command.
7. To apply shaping policy to a traffic class, use the following com-
mand.
Confidential and Proprietary Information of ZTE CORPORATION 107