ZXR10 3900A/3200A Series Hardware Installation Manual
Cabinet Installation
To install the ZXR10 3900A/3200A switch into the 19-inch cabinet,
it is necessary to install flanges to each side of the switch shell
(flange and screws are part of the accessories), as shown in
.
F
IGURE
35 INSTALLING THE FLANGES
1.
Case
2.
Flange
3.
Screw
Install two symmetrical brackets at the two sides of the 19-inch
cabinet to support the switch, as shown in
F
IGURE
36 INSTALLING THE BRACKETS
1.
Bracket
2.
Rack
3.
Screw
After the installation, push in the switch along the bracket, and fix
the flanges to the cabinet, as shown in
28
Confidential and Proprietary Information of ZTE CORPORATION