Zte ZXR10 2920, Руководство пользователя

Страница: 186 / 341

ZXR10 2920/2928/2952
(V1.0)
Access Switch User Manual
（
Volume I
）
172 Confidential and Proprietary Information of ZTE CORPORATION
T
A B L E
2 7 9 R
A D I U S
I
S P S H A R E D S E C R E T
Format Mode Function
radius isp
<ispname>
sharedsecret
<string>
nas config This sets shared
password
Result: This sets shared password.
Note: Shared password is used for data encryption between
RADIUS client and RADIUS server. Setting of shared
password must be consistent on the client and server.
8. To specify a default domain, use command radius isp
<ispname> defaultisp {enable|disable} in nas config
mode. This is shown in Table 280.
T
A B L E
2 8 0 D
E F A U L T
I
S P
D
E F A U L T
I
S P
C
O M M A N D
Format Mode Function
radius isp
<ispname>
defaultisp
{enable|disable}
nas config This specifies a
default domain
Result: This specifies a default domain.
Note: Only one domain can be specified as default domain in
system. System will send subscriber authentication
requests without domain name specified on RADIUS
authentication server in default domain.
9. To set full account of domain, use command radius isp
<ispname> fullaccount {enable|disable} in nas config
mode. This is shown in Table 281.
T
A B L E
2 8 1 R
A D I U S
I
S P
F
U L L A C C O U N T
C
O M M A N D
Format Mode Function
radius isp
<ispname>
fullaccount
{enable|disable}
nas config This sets full
account of domain
Result: This sets full account of domain.
Note: When it is specified to use full account, RADIUS client
uses “username@DomainName” as subscriber name to
request authentication of RADIUS server. If it is not
specified to use full account, subscriber name will not
contain domain name.
10. To configure domain description, use command radius
isp <ispname> description <string> in nas config mode.
This is shown in Table 282.