Zte ZXR10 2920, Руководство пользователя

Страница: 262 / 341

ZXR10 2920/2928/2952
(V1.0)
Access Switch User Manual
（
Volume I
）
248 Confidential and Proprietary Information of ZTE CORPORATION
Result: This starts collecting topology information manually.
Note: To know network topology information at any time,
user can manually start topology information collection
procedure, without depending on automatic topology
information collection
6. To display ZTP configuration, use command show ztp in
group config mode. This is shown in Table 404.
T
A B L E
4 0 4 S
H O W
S
T A R T
C
O M M A N D
Format Mode Function
show ztp group config This displays ZTP
configuration
Result: This displays ZTP configuration.
7. To display details of specified device according to MAC
address, use command show ztp mac in group config
mode. This is shown in Table 405.
T
A B L E
4 0 5 Z
T P
M
A C
C
O M M A N D
Format Mode Function
show ztp mac group config This displays detail
of specified device
according to MAC
address
Result: This displays detail of specified device according to
MAC address.
8. To display topology information table, use command
show ztp device [<idlist>] in group config mode. This is
shown in Table 406.
T
A B L E
4 0 6 S
H O W
Z
T P
D
E V I C E
C
O M M A N D
Format Mode Function
show ztp device
[<idlist>]
group config This displays
topology
information table
Result: This displays topology information table.
Note: Device ID offered by topology information table is the
temporary ID that is generated based on current topology
information collection result. With the purpose of
facilitating display and cluster management, it is effective to
current topology information collection result only.
E
ND OF STEPS
ZTP has been configured. Result