4
1.
Use the power voltage between 110VAC and 220VAC. Using voltage beyond this range may cause leakage, fire or damage to the phone and charger.
2.
Do not short-circuit the charger. It might cause electric shock, smoldering or damage.
3.
Do not charge the battery in direct sunlight, near dampness, dust, vibration, TV sets, or radios.
4.
Do not use the charger if the power cable is damaged. It might cause fire or electric shock.
5.
Do not place water containers near the charger. If water or any other kind of liquid splashes on the charger, immediately remove the charger from
the power socket to avoid overheating, fire, electric shock or power failure.
6.
Do not disassemble or reassemble the charger. It might cause injury, electric shock, fire or damage.
7.
Do not touch any charger, power cable or power socket with wet hands. It might cause electric shock.
8.
Do not place heavy objects on top of power cables or refit power cables. It might cause electric shock or fire.
9.
Remove the power plug from the socket before cleaning and maintenance.
10.
Hold the charger rather than pull the power cable while removing the plug from the socket. Failure to do say might cause damage, electric shock
or fire.
Dimensions
Dimension
104.7mm
×
53mm
×
11.94mm
Weight (with battery)
≈
100g
Display
TFT 1.8', 128*160
Parts definition
Appearance
Center key
Send key
Status bar
R
Power key
Volume keys
USB /charger connector
Headset jack
End key
Receiver
Camera
Содержание Cell Phone
Страница 2: ...2 FAILURE ANALYSIS 19 ...
