18
they are altered because of the change of the functionality or other properties without prior written authorisation of the manufacturer;
d)
Consumable parts other than in the case of damage brought on because of faults in the material or manufacturing;
e)
Impossibility of partial and/or complete usage of the Device because of unauthorised modification of the software.
Article 3
ZTE is obliged during the guarantee, within a reasonable time frame, to remove all reported faults and defects of the Device covered with this
guarantee certificate which have come to be with the proper and regular use of the Device, to repair the Device in an authorised service centre or a
replacement of the faulty Device with the same but properly working Device if a repair is not possible.
Article 4
The guarantee stops being valid if:
1.
the information from the invoice and/or the guarantee are erased or altered;
2.
the information on the Device (type, and serial number of the manufacturer) are erased or altered;
3.
it is established that the Device was opened by an unauthorised person.
Note: customers can report faults and establish the guarantee with the salesman or relevant T-Mobile Customer Services representative
*Concrete cases of faults or damages which are not covered by the guarantee include:
4.
Damages caused by intentional separation, opening or dissembling the enclosure;
5.
Damages or faults with the operation caused by the removal and insertion of exterior and interior parts of the Device;
6.
Damages caused by holes in the enclosure;
7.
Cracked glass or LCD because of outside factors;
8.
Damages or faults caused by an outside force;
9.
Damages or faults caused by liquids;
10.
Damages or faults caused by liquid or dry chemical substances (such as gasoline, acids, corrosive material), dust, dirt and other foreign objects;
11.
Damages or faults caused by outside heat or fire (damage by interior heat is covered if it did not occur through an outside reason);
12.
Superficial damages occurring through external reasons, including dents, shabbiness, scratches on the enclosure, discoloration, cracks, peeling or
metal or plastic parts of the enclosure.
** The customer is advised to regularly make copies of their information and other contents on the Device and to erase the same from the memory of
the Device before handing the Device over to any relevant service third party. If the customer does not do this, ZTE is not responsible for the loss of
information in the memory of the Device to the customer or a third party.
Содержание Cell Phone
Страница 2: ...2 FAILURE ANALYSIS 19 ...
