Zte AD3812 Скачать руководство пользователя страница 44

Страница: 44 / 71

WCDMA Module

2 not registered, but MT is currently trying to attach or searching an operator to
register to

The UE is in GMM state GMM-DEREGISTERED or
GMM-REGISTERED-INITIATED. The GPRS service is

enabled, but an allowable PLMN is currently not available. The UE will start a
GPRS attach as soon as an

allowable PLMN is available.

3 registration denied

The UE is in GMM state GMM-NULL. The GPRS service is disabled, the UE is
not allowed to attach for GPRS

if requested by the user.

4 unknown

5 registered, roaming

The UE is in GMM state GMM-REGISTERED or
GMM-ROUTING-AREA-UPDATING-INITIATED on a

visited PLMN.

<lac>: string type; two byte location area code in hexadecimal format (e.g.
"00C3" equals 195 in decimal)

<ci>: string type; two byte cell ID in hexadecimal format

4.14 +IPR Fixed DTE Rate

Description

This command specifies the data rate at which the DCE will accept commands.

+ IPR=[<n>]

+CME ERROR: <err>

+ IPR =?

+ ECHO: <level>

+CME ERROR: <err>

Command

+ IPR?

+ SIDET: (list of supported <level>s)

+CME ERROR: <err>

Defined values

0 Enable autobaud

38400 Disable autobaud and set rate to

38400 bps

4.15 +FCLASS Select mode

Description

This command puts the TA into a particular mode of operation (data, fax, voice
etc.). This causes the TA to process

information in a manner suitable for that type of information (rather than for other
types of information).

Voice mode is of particular interest here, and has an additional result code
+VCON. Specifically, +VCON indicates that

the TA is entering the voice command mode and there is a voice connection to
at least one audio input or output. This

Содержание AD3812








































































Результаты поиска

Содержание AD3812

Отзывы:

Бренды по названию

Популярные бренды

Zte AD3812, Руководство по управлению

Результаты поиска

Содержание AD3812

Отзывы:

Бренды по названию

Популярные бренды