Zte AD3812 Скачать руководство пользователя страница 14

Страница: 14 / 71

WCDMA Module

Call control commands and methods

3.1 ATD\ATA\ATH\ATS0

V.250 [14] dial command D lists characters that may be used in a dialling string for making a call or
controlling

supplementary services in accordance with 3GPP TS 22.030 [19]. Their use in GSM/UMTS is listed in
this subclause,

as well as new dial modifiers applicable only to GSM/UMTS are introduced. For a MT supporting AT
commands only,

it is mandatory to support the control of supplementary services in accordance with 3GPP TS 22.030
[19] through the

dial command or through the specific supplementary service commands (+CCFC, +CLCK, etc.),
where 3GPP TS 22.030

[19] identifies the supplementary services as mandatory.

V.250 dialling digits

1 2 3 4 5 6 7 8 9 0 * # + A B C (implementation of these characters is mandatory for GSM/UMTS)

D (implementation of this character is optional for GSM/UMTS, and it is ignored)

V.250 modifier characters

, (implementation of this character is mandatory for GSM/UMTS, but it may be ignored)

T P (implementation of these characters is mandatory for GSM/UMTS, but they are ignored)

! W @ (implementation of these characters is optional for GSM/UMTS, and they are ignored)

V.250 semicolon character

In GSM/UMTS, when semicolon character is given after dialling digits (or modifiers), a voice call
originated to the

given address. TA returns to command state immediately (or after poCOLP result code; refer
subclause

"Connected line identification presenCOLP"). Refer Annex G for a detailed example.

GSM/UMTS modifier characters

> (refer subclause "Direct dialling from phonebooks")

I or i (override the CLIR supplementary service subscription default value for this call; I = invocation
(restrict CLI

presentation) and i = suppression (allow CLI presentation); refer subclause "Calling line identification
restriction

+CLIR")

G or g (control the CUG supplementary service information for this call; uses index and info values set
with command

+CCUG; refer subclause "Closed user group +CCUG")

3.2 +CSTA Select type of address

Description

Set command selects the type of number for further dialling commands (D)
according to GSM/UMTS specifications.

Test command returns values supported a compound value.

Содержание AD3812








































































Результаты поиска

Содержание AD3812

Отзывы:

Бренды по названию

Популярные бренды

Zte AD3812, Руководство по управлению

Результаты поиска

Содержание AD3812

Отзывы:

Бренды по названию

Популярные бренды