7
Overview
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
Lubricants
The following lubricants are required for maintenance. These can be ordered from
.
a spray can containing sewing machine oil
(JCW 35 Super Lubrifiant, ZSK order No. 750 081)
a grease cartridge
(Gleitmo 585M, ZSK order No. 667 055)
If possible, use
only original lubricants
to maintain your embroidery machine.
Waste grease and oil is to be treated in compliance with the disposal
regulations applicable in the country concerned or surrendered to a
hazardous waste facility.
Note the remarks below if you elect to use different lubricants:
The table below contains the DIN 51502 designations and the principal properties of the
ZSK original lubricants. If using other lubricants, choose only greases and oils that are in
the same category as the original lubricants and thus have similar properties.
Lubricant
Designation acc. to
DIN 51 502
Description/Properties
JC W 35
Superlubrifiant
CL
22
Circulation system lubricating oil with
additives to improve resistance to ageing
and corrosion according to DIN 51517
Part 2.
Viscosity at 40°C: 22 ± 2.2 mm2/s (cSt)
Gleitmo 585M
KPF
2K
Lubricating grease for high pressures,
water resistant, with additives to
improve resistance to corrosion and
wear, and solid lubricant based on
MoS2.
Worked penetration:
265-295 10-1 mm,
Service temperature:
-20 to +120°C
Maintenance work
