10
Foot plate: Flatbed machines
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
Grease drive wheels
• With the stitch plate removed, apply a
little grease to the upper drive wheel
of the foot plate.
Fig. 3: Foot plate, greasing drive wheel
• Remove the protective hood
q
under
the foot plate q.
Fig. 4: Dismantle foot plate, protective hood below (view from below)
• The bottom helical gear wheel is ac
-
cessible through the open base of the
foot plate. Apply grease to the gear
wheel from underneath with a brush.
• Use the handwheel to rotate the shaft
in order to gain access to the teeth at
the back as well.
Fig. 5: Fußplatte, Antriebsrad fetten
• Make sure that
all the teeth
of the helical gear wheels are adequately coated with
grease.
Every three months:
v