34
T8/T8-2 settings
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
If you need a larger display of the set value to see the value from a
greater distance, press the [L8] Main shaft position key. The set value
is then shown large on the display.
The display should show a value that reaches max. +/- 0.5° deviation
from the entered main shaft position. If no value within this tolerance
is reached (possibly with larger multi-head machines), the main shaft
position must be readjusted manually. If necessary, the correct position
of the main shaft can also be adjusted by pressing [R8]
Stop testing
and pressing [L8]
Start testing
again.
• Perform the height adjustment of the borer.
• Press the
[R8]
Stop testing
key to end the
Set boring depth
function.
After pressing the [R8]
Stop testing
key, the main shaft is returned to
the original position after the drilling depth has been set. There is also
a needle change to the previously active needle.
