ZR FLYBOARD Pro Series, Руководство пользователя

Страница: 56 / 57

55
MAINTENANCE – AFTER SALES SERVICE
WARNING: NEVER use hydrocarbons like acetone or petrol on polycarbonate parts (all see-through parts) as these products
can seriously damage the material.
To ensure adequate security, we recommend to:
•Check the all board’s screws are tight after 2 hours of use.
• Change the supply hose every 2 years.
• Change the plastic balls ref. FB02267 of Flyboard® deck ref. FB04B01 every year. Ensure to use silicone grease or Vaseline
(no marine grease or other product containing hydrocarbons that may damage the Flyboard® material).
• Change the clips ref. FB02046 of the Flyboard® deck ref. FB04B01 every year.
• Change the rings ref. FB04070, FB04071, FB04087, FB04094 and FB03011 every year.
• Flyboard® should be rinsed with clean water after each use (hose, deck, bindings) and stored in a dry location away from direct
sunlight (this does not apply to the X-Armor hose ZR01003 / ZR01003-23).
• Do not pull the hose on the floor when full of water (this does not apply to the X-Armor hose ZR01003 / ZR01003-23).
• The hose should be rinsed, dried and rolled up after each use and stored away from direct sunlight (this does not apply
to the X-Armor hose ZR01003 / ZR01003-23).
WARRANTY
Flyboard® is covered by warranty against all manufacturing faults for 1 year following the date of purchase. You will be required
to provide your purchasing invoice.
ZAPATA RACING® will provide warranty cover on Flyboard® if used as described in this manual.
Warranty is limited to the operation and not the visual condition of the parts.
Warranty does not cover any part subject to wear and tear (i.e. plastic balls ref. FB02267, hose (ref. FB02002 / ZR01002 / ZR01002-23, etc.)
Flyboard® should be used in its original configuration. It is strictly forbidden and dangerous to modify, remove or add parts other than those
provided by ZAPATA RACING®.
Breakage of equipment caused by falls or violent/extreme use will not be covered by warranty.