ZR FLYBOARD Pro Series, Руководство пользователя

Страница: 54 / 57

53
The Flyboard® user and the PWC driver must be sure that Flyboard® user has sufficient stability and does not fall on his back before a new step
in height.
The Flyboard® user must always be positioned to move forward and never backward to limit falls on his back.
The Flyboard® user must constantly control his relative position to the PWC and be even more vigilant when he rises above 4 meters height.
The Flyboard® user must always check the presence of any objects, reefs, buoys, etc.
When falling into water, the Flyboard® user must always check the distance between him and the watercraft because the inertia may push the PWC
at a low speed in the user’s direction.
When falling into water, it is essential that the Flyboard® user or the watercraft driver releases the throttle as soon as possible and turns off the en-
gine.
When the Flyboard® user is underwater (fall or dive) the watercraft driver must immediately releases the throttle and turn the engine off.
A minimum level in swimming is compulsory. Flyboard® should not be used by water phobic people.
When falling (especially on the back), the Flyboard® user can go up to a 2 meters depth underwater so he must anticipate an apnea of about 10
seconds during the fall and during immersion.
Never take a path towards the PWC.
Note : Flyboard® bearings will be stiffer than normal for the first 10 minutes of use.
USING FLYBOARD® FOR THE FIRST TIME
It is mandatory to follow an hour of training in a specialized fly center to understand the basics and the main security rules (please refer to the “ZR
Spots” section on www.zapata-racing.com.)
When flying a novice person, the watercraft driver mustn’t exceed 4500 RPM. It is important not to accelerate if the user fails to take off because
the user may be propelled in the air when positioning his feet flat.
If the person fails to take off, it means his feet are not well positioned.
USING FLYBOARD® WITH EMK (OPTIONAL)
If the Flyboard® user uses the EMK for the first time, level 1 (learning mode) must be used first (only 1 LED lit) during 20 minutes at least.
The user must train at each level for 20 minutes minimum before advancing to the next level. At the exception of level 4 which should never be used
before 5 hours of training at level 3, and level 5 which should never be used before 10 hours of training at level 4.