17
Password for stream encryption
:
Crypto key length in bytes
:
Note: Click the “Save” button to display the “Save
successful!” message, then settings take effect. Method of
obtaining RTSP: rtsp:// device IP address: 554/ live/ av0
(av0 for main stream; av1 for sub stream)
3) RTP Multicast
Enable
: To turn on/ off the Main/ Sub stream
Protocol Type
: Main/ Sub stream applies RTMP protocol.
(Main/ Sub stream default RTP; TS optional)
Multicast Address
: (Main/ Sub stream default 224.1.2.3)
Multicast Port
: (Main stream default 4000, Sub stream
default 4002)
Access
Method
:
(Main
stream
default
rtp://224.1.2.3:4000,
Sub
stream
default
rtp://224.1.2.3:4002)
Note: Click the “Save” button to display the “Save the
parameters successful!” message, then settings take
effect.
4) Video Parameters
a. Focus
: Focus mode, AF-Zone, AF-Sensitivity can be
set.
Focus Mode: set the focus mode (default Auto; Manual,
OnePush optional)
AF-Zone: set the focus range (default All; Top, Center
and Bottom optional)
AF-Sensitivity: set the focus sensitivity (default Low;
high, medium optional)
b. Exposure
: Mode, EV, BLC, Flicker, G.Limit and
DRC can be set.
Exposure Mode: set the Exposure Mode (default Auto;
Manual, SAE, AAE, Bright optional)
Exposure compensation: Exposure compensation setting
is active when it is auto status (default OFF; -7 to 7
optional)
BLC: Set the exposure compensation value, valid when it
is set for auto (default OFF)
Flicker: set up Flicker mode, valid when status of
automatic, aperture or brightness priority (default 50Hz;
OFF and 60Hz optional)
G.Limit: set the gain limits, auto, active when it is status
of aperture or brightness priority (default 4, 0-15 optional)
DRC: Set the dynamic range (default 4, OFF-8 optional)
c. Color
: WB Mode, RG Turning, BG Turning, Sat
uration, Hue and AWB Sensitivity can be set.
WB Mode: Set the white balance mode (default Auto;
Manual, OnePush and VAR optional)
RG Turning: Set the red gain (default 0; -10 to 10 optional)
BG Turning: Set the Blue gain (default 0; -10 to 10
optional)
Saturation: Set the saturation (default 100%; 60%, 70%,
80%, 90%, 100%, 110%, 120%, 130%, 140%, 150%,
160%, 170%, 180%, 190% and 200% optional).
Hue:
(default 7; 0-14 optional)
AWB Sensitivity: Sensitivity Auto white balance settings
(default High; Low and Middle optional)
d. Image
: Bright, Contrast, Sharpness, Gamma, DCI,
B&W Mode, Flip-H, Flip-V, DZoom and Low-Light
Mode can be set.
Bright: Set the brightness (default 6; 0-14 optional)
Contrast: Set the contrast (default 8; 0-14 optional)
Sharpness: Set the sharpness value (default 6; 0-15
optional)
Gamma: Set the gamma (default 0.45; default, 0.50, 0.55
and 0.63 optional)
DCI: Set the dynamic contrast (default 2; OFF-8 optional)
B&W Mode: Set the black and white mode (default Color;
B&W optional)
Flip-H: Set the Flip Horizontal (default OFF; ON
optional)
Flip-V: Set the Vertical Flip (default OFF; ON optional)
DZoom: Set the digital zoom (default OFF; ON optional)
Low-Light Mode: Set the low-light mode (default OFF;
ON optional)
e. NR
: NR-2D, NR-3D and Dynamic HOT Pixel can be
set.
NR-2D: Set 2D noise reduction level (default 6; OFF-7
and Auto optional)
NR-3D: Set 3D noise reduction level (default 4; OFF-8
and Auto optional)
Dynamic Hot Pixel: Set dynamic hot pixel (default OFF;
1-5 optional)
f. Style
: Style can be set.
Style
: Set the image style (default Clarity; Default,
Normal, Bright and Soft optional)
Note: Click the “Refresh” button to refresh parameters
of a. b. c. d. e effective.
5) Video OSD
