User Manul
2
Image 1 Display screen
2
Basic operation
Power on
Press and hold the “SCAN” key for 2 seconds in power off mode to power on and enter the
main display screen.
Scanning tag
Press “scan” key in main display screen, then the screen will display “scanning”
and start scanning tag. The buzzer will ring once after reading the tag and the current
tag information will appear on the screen at the same time. The buzzer will ring once
and the screen will display “No tag found” if there‟s no tag information to be scaned
in 10 seconds.
Data viewing
Press „<‟ / „>‟ key in the main screen to view tag information and time.
Turn off automatically
In power on mode, the system will enter standby mode automatically if there‟s no operation
or data transmission within 30 seconds.
3
System setting
Press and hold “SCAN” key in power on mode to enter setting mode, the screen will be
shown as below.
Image 2 Setting mode screen
