background image

4

    

Intel G31 Motherboard

Motherboard Specifications

q

 

 Chipset

     

Intel G31

q

 

 Size 

     

Micro ATX form factor of 9.6 inch x 7.5 inch

q

   

Microprocessor support

     

Supports the Pentium4, Pentium D and Core(TM) 2 Series processor

 

 

Supports Front Side Bus (FSB) at the following Frequency Ranges:800, 1066,

         1333 MT/s.

q

   

VRD  On board

     

Flexible motherboard design with on board VRD 11.

q

    

Operating systems:

     

Supports Windows XP 32bit/64bit and Windows Vista 32bit/64bit

q

   

System Memory support

 

 

Supports dual-channel (128 bits wide ) DDRII memory interface.

 

 

Supports DDRII667/DDRII800

 

 

Maximum memory size:4GB

q

    

USB .0 Ports

 

 

Supports hot plug and play

 

 

Eight USB 2.0 ports (four rear panel ports, four from onboard USB headers)

 

 

Supports USB 2.0 protocol up to 480Mbps transmission rate

q

   

Onboard Serial ATA II

 

 

Independent DMA operation on four ports.

 

 

v

 Data transfer rates of 3GB/S.

q

 

  On board PCI Express Lan (RTL80E/RTL8C) 

 

 

v

 PCI Express base specification1.0a compliant

 

 

v

 Compliant to 802.3x flow control support

 

 

v

 10/100 IEEE 802.3 compliant

 

 

v

 Wake On LAN (WOL) power management support

 

 

v

 RTL8111C is Gigabit Ethernet controller

q

    

Onboard High Definition Audio

 

 

Supports 6-channel and 8-channel(Optional)

 

 

Supports Jack-Sensing function

 

 

One SPDIF-Out header on board

q

    

Green Function

 

 v 

Support SMM, APM, ACPI

 

 v 

Suspend to DRAM supported (STR)

 

 v 

RTC timer to power-on the system

 

 v 

AC power failure recovery

Содержание G31 series































































Отзывы: