Zotac G31 series, Руководство пользователя

Страница: 16 / 62

5
120 240
121
LO
TE
S
R
E
O
E
V
M
Li
th
iu
m
ce
ll
C
R2
03
2
3V
S
C
8
120 240
121
Hardware Installation
Front panel header
The front panel header on this motherboard is one connector used
to connect the following four cables (see Table 2 for pin definitions):
q
PWRLED
Attach the front panel power LED cable to these two pins of the connector. The
Power LED indicates the system’s status.
Note: Some chassis do not have all four cables. Be sure to match the name on
the connectors to the corresponding pins.
q
PWR SW
Attach the power button cable from the case to these two pins. Pressing the
power button on the front panel turns the system on and off rather than using the
power supply button.
q
HDD LED
Attach the hard disk drive indicator LED cable to these two pins. The HDD
indicator LED indicates the activity status of the hard disks.
q
RST SW
Attach the Reset switch cable from the front panel of the case to these two pins.
The system restarts when the
RESET switch is pressed.
RESET
GND
HDD_LED-
FP1
NC
PWR_SW
KEY
7
9
5
3
1
6
8
10
2
4
GND
PW_LED-
Front Panel Header Pin Definition