35
Configuring the BIOS
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)]
if you want the BIOS to automatically populate
these fields. If you select
[Manual]
so you can assign the resources,
IRQ
Resources
is enabled for input.
q
IRQ Resources
To enable this field for input, set
Resources Controlled By to [Manual]
.
With this field enabled, press
Enter
to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus specification.
Use PCI/ISA PnP for devices compliant with the plug-and-play standard, whether
designed for PCI or ISA Bus architecture.
q
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or disable
the Palette Snoop function.
q
INT pin //3/4/5/6/7/8 Assignment
Use these options to set the mode of INT pin 1/2/3/4/5/6/7/8 Assignment
q
Maximum Payload Size
This function on the PnP/PCI Configuration menu allows you to set the maximum
TLP payload size (in bytes) for the PCI Express devices. Use the
Page Up
and
Page Down
keys to scroll through sizes or enter the number using
the keyboard numbers or use the + and – keys to go up and down the list of
sizes.
Содержание G31 series
