23
1. Check the "Sensor Level" (PIR sensitivity) parameter
setting. For warm environmental conditions, set the Sensor
Level to "High" and for cold weather use, set the sensor for
"Low".
2. Try to set your camera up in an area where there is not a
heat source in the camera's line of sight.
3. In some cases, setting the camera near water will make the
camera take images with no subject in them. Try aiming the
camera over ground.
4. Try to avoid setting the camera up on small trees that are
prone to being moved by strong winds.
5. Remove any limbs which are right in front of the camera
lens.
PIR Sensor LED Flashes/Doesn't Flash
1. When the camera is in the "
SET
" mode, a special LED on
the front of the camera will flash when it senses motion.
This is for setup purposes only and will help the user aim
the camera.
2. During use, the LED will not flash when the camera takes
an image. This is to help keep the camera hidden from
game.
Camera won't retain settings
Make sure that you have been saving the changes to any
parameter settings that you made while in
SET
mode, by
pressing "
OK
" after changing the setting, if you don't save
your new setting after changing it, the camera will continue to
use the original default setting for that parameter.
