Zoomlion RT75, Руководство оператора

Страница: 139 / 178

RT75 Rough Terrain Crane
07 - 49
Figure 07
–
49 Offset
F. Disassemble the jib.
After you complete the jib operation, disassemble the jib in reverse order of the
assemble steps.


Make sure that the area is clear of personnel and equipment before you move
the boom around.
Figure 07
–
50 Hazard Area - Boom Swing


The outriggers must be fully extended and the jib must be turned over front
before you assemble or disassemble the jib.


When you install the jib to the side of the boom, you must install all the pins. Do
not move the crane until all the jib pins are in position.


When you use the jib in a lift operation, put the high / low speed selector switch
for aux. winch in the high or low position.


Fully retract the boom. Move the jib to the front of the crane and set the boom to
the -3° position. You must use the correct work stands (ladders, stairs, etc.)
when you assemble or disassemble the jib.
Caution
20

or 40
